Accessories

Other IT Accessories
Sort By:  
MikroTik CCR1009-7G-1C-1S+ (CCR1009-7G-1C-1S+)
1U rackmount, 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, SmartCard slot, RouterOS L6

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

Specifications

Details
Product codeCCR1009-7G-1C-1S+
ArchitectureTILE
CPUTLR4-00980CH-10CE-A3b
CPU core count9
CPU nominal frequency1.2 GHz
Dimensions444x175x47mm
License level6
Operating SystemRouterOS
Size of RAM2 GB
Storage size128 MB
Storage typeNAND
Tested ambient temperature-20C .. +60C

Powering

Details
Max Power consumption34W
PoE inPassive PoE
PoE in input Voltage15-57 V
Number of AC inputs2
AC input range100-240
Number of DC inputs1 (PoE-IN)

Ethernet

Details
10/100/1000 Ethernet ports7
Ethernet Combo ports1

Fiber

Details
SFP+ ports1

Peripherals

Details
Number of SIM slots1 Smart card (Mini SIM)
Serial portRS232
Number of USB ports1
USB Power ResetYes
USB slot typemicroUSB type AB
Max USB current (A)1

Other

Details
CPU temperature monitorYes
Current MonitorYes
PCB temperature monitorYes
Voltage MonitorYes
৳0.00
BDCOM P3310C OLT (P3310C)

 

Technical Parameters

 

৳0.00
Viewtech XVR + DVR 16CH (e1-xv-vt-11)

Check accessories tab to add a hard drive.  Viewtech will install the hard drive and power up the NVR before dispatch.

The Dahua 32CH NVR offer an unbelievable incoming bandwidth of 320Mbps.  This unit has 4 HDD bays allowing total storage of 24TB.

H.264 & H.265 Recording

This NVR is compatible with both H.264 and H.265 streams.  

Built in PoE Switch

This NVR offers a built in 16 port PoE switches. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.

Dual HDMI Outputs

One primary / replay output and one programmable output for spot monitors. The programmable output can be fully programmed with a number of different cycling and matrix functions.

Plug & Play

This NVR offers a built in 16 port PoE switch. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.

The remaining 16 cameras can be installed via an external switch.

Advanced Motion Detection

Multi-region maskable motion detection allows complete customisation of motion activated recording. Both sensitivity and threshold can be adjusted.

Web Interface
The easy to use web interface is fast and intuitive. Features likes video settings, SD card record and playback control, network information, motion detection as well as hundreds of other settings can all be done from here.

Mobile Phone Support

All Dahua cameras and NVRs feature fully featured mobile apps. These are supported for iPhone and Android. Features include live view, playback, alarm monitoring, status monitoring, full remote setup and push alerts. Push alerts send notifications straight to your phone regarding motion detect or other alarms.

৳0.00
Data Center Backup Generator (Gen-dc-19)

Managers of data centers offering collocation and cloud services sign contracts guaranteeing 100% up-time. Most engineering types would say that's impossible; however, that kind of guarantee is the cost of doing business in today's market. If the service is anything less than 100%, clients get substantive refunds, and the data center loses credibility.

That could explain why data-center operators will spend millions of dollars on backup power-generation equipment, which more often than not amounts to diesel generator sets similar to the Cummins model pictured above.

To learn more about how these monsters work, I contacted the Cummings Power-Generation Business Unit, which is the division that builds generator sets of all sizes, from Oman RV models on up. At the division headquarters in Minnesota I met Richard Hallahan, Technical Marketing Manager for Data Centers and a certified professional engineer, and he ushered me into a high-tech conference room and asked how he could help.

৳0.00
MikroTik Router Board Wireless 5 LAN Port PoE RB951Ui-2HnD (MikroTik hAP lite)
MikroTik router board wireless wi-fi RB951Ui-2HnD has five ethernet LAN ports and PoE output, routerOS operating system, 600 MHz CPU, 128 megabyte RAM, USB port, dimensions 113x138x29 mm.


Router TypeWi-Fi Router
AntennaConceal Antenna
Wired Port5 x 10/100 Ethernet Port
Wi-Fi802.11b/g/n

Product Warranty

This product mikrotik rb951ui-2hnd wireless router comes with 1 year warranty.

৳2,850.00
MikroTik hEX lite RB750r2 (RB750r2)
5x Gigabit Ethernet with PoE output for four ports, USB, 800MHz CPU, 128MB RAM, RouterOS L4

hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.

It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.

It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.


Specifications

Details
Product codeRB750r2
ArchitectureMIPSBE
CPUQCA9533
CPU core count1
CPU nominal frequency850 MHz
Dimensions113x89x28mm. Weight without packaging and cables: 129g
License level4
Operating SystemRouterOS
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-20C to +70C

Powering

Details
Max Power consumption2W
PoE inPassive PoE
PoE in input Voltage6-30 V
Number of DC inputs2 (DC jack, PoE-IN)
DC jack input Voltage6-30 V

Ethernet

Details
10/100 Ethernet ports5
৳5,200.00
MikroTik hEX PoE RB951Ui 2HnD - Wireless (RB951Ui 2HnD)
5x Gigabit Ethernet with PoE output for four ports, USB, 800MHz CPU, 128MB RAM, RouterOS L4

hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.

It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.

It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.

Specifications

Details
Product codeRB951Ui 2HnD
ArchitectureMIPSBE
CPUQCA9557
CPU core count1
CPU nominal frequency800 MHz
License level4
Size of RAM128 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-40 + 70 C

Powering

Details
Max Power consumption9W
PoE inPassive PoE
PoE out802.3af/at
PoE in input Voltage12-57 V
Number of DC inputs2 (DC jack, PoE-IN)
DC jack input Voltage12-57 V

Ethernet

Details
10/100/1000 Ethernet ports5

Fiber

Details
SFP ports1

Peripherals

Details
Number of USB ports1
USB Power ResetYes
USB slot typeUSB type A
Max USB current (A)1

Other

Details
PCB temperature monitorYes
Voltage MonitorYes
৳6,500.00
MikroTik RB450G Router (RB450G)

Specifications

Details
Product codeRB450G
ArchitectureMIPSBE
CPUAR7161
CPU core count1
CPU nominal frequency680 MHz
License level5
Operating SystemRouterOS
Size of RAM256 MB
Storage size512 MB
Storage typeNAND
Tested ambient temperature-20°C .. +70°C tested

Powering

Details
PoE inPassive PoE
PoE in input Voltage8-28 V
Number of DC inputs2 (DC jack, PoE-IN)
DC jack input Voltage8-28 V

Ethernet

Details
10/100/1000 Ethernet ports5

Peripherals

Details
Memory card typemicroSD
Memory Cards1
Serial portRS232

Other

Details
PCB temperature monitorYes
Voltage MonitorYes
৳10,500.00
Mikrotik RB2011UiAS-2HnD-IN 128MB RAM 1 Core CPU Routerboard (Mikrotik RB2011UiAS-2HnD-IN)

Specifications

Details
Product codeRB2011UiAS-2HnD-IN
ArchitectureMIPSBE
CPUAR9344
CPU core count1
CPU nominal frequency600 MHz
Dimensions214mm x 86mm for PCB
License level5
Operating SystemRouterOS
Size of RAM128 MB
Storage size128 MB
Storage typeNAND
Tested ambient temperature-35C to +65C
Suggested price$129.00

Powering

Details
Max Power consumption11W
PoE inPassive PoE
PoE outPassive PoE
PoE in input Voltage8-30 V
Number of DC inputs2 (DC jack, PoE-IN)
DC jack input Voltage8-30 V

Wireless

Details
Wireless 2.4 GHz number of chains2
Wireless 2.4 GHz standards802.11b/g/n
Antenna gain dBi for 2.4 GHz4
Wireless 2.4 GHz chip modelAR9344

Ethernet

Details
10/100 Ethernet ports5
10/100/1000 Ethernet ports5

Fiber

Details
SFP DDMIYes
SFP ports1

Peripherals

Details
Serial portRJ45
Number of USB ports1
USB Power ResetYes
USB slot typeUSB type A
Max USB current (A)1

Other

Details
PCB temperature monitorYes
Voltage MonitorYes

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s30-96
11MBit/s28-80
6MBit/s30-96
54MBit/s27-80
MCS030-92
MCS725-73
৳12,500.00
Zebra ZXP Series 3 Dual Sided ID Card Printer (Zebra ZXP Series 3 Dual Sided ID Card Printer)

ZXP Series 3 Card Printer

Zebra’s ZXP Series 3™ direct-to-card printer provides an array of features, outstanding print quality, and a low cost of ownership. The ZXP Series 3 offers a wide range of high capacity ribbon options, along with the capability to select the card thickness that is right for the application. And, when paired with Zebra’s eco-friendly media,

the ZXP Series 3 is the most cost-effective printing solution in its class.

The ZXP Series 3 offers vivid, high-quality full color and monochrome printing on single- or dual-sided cards. Operating the ZXP Series

3 is simplified with an intuitive design, color touch points, and quick-replace higher capacity Load-N-Go™ smart ribbons, which are now eco-friendly using less plastic and more biodegradable material. Zebra’s ZRaster™ host-based image processing technology enables high speed printing — without sacrificing image quality.

The printer’s compact design makes it the right choice for tight work spaces. Smart card and magnetic stripe encoding options allow the ZXP Series 3 to meet the needs of a variety of markets and applications, including ID and access control cards as well as personalized gift, membership and loyalty cards. Standard Kensington™ lock feature and optional enclosure lock make the ZXP Series 3 ideal for secure card printing solutions.

Print Touch

The ZXP Series 3 includes Zebra® Print Touch™, an embedded Near Field Communication (NFC) chip and software. Just hold your NFC enabled smartphone up to the Zebra Print Touch logo on the printer to read key printer information and launch web-based help pages.

Genuine Zebra Supplies

Genuine Zebra supplies meet stringent quality standards and are recommended for optimal printing quality and proper printer performance.

CardStudio Software

Zebra’s CardStudio™ is an easy-to-learn, easy-to-operate complete card design and card issuance software suite. It makes designing and printing high quality photo ID cards and other cards easy, with basic to advanced features, and support for all Zebra card printers. For more information, visit www.zebra.com/cardstudio.



ZXP Series 3 Specifications

PRINTER NAME

ZXP Series 3

STANDARD FEATURES

True Colours® ix Series™ ZXP 3 high-performance ribbons with intelligent media technology

High capacity, eco-friendly Load-N-Go™ drop-in ribbon cartridges

ZRaster™ host-based image processing

Auto calibration of ribbon

USB connectivity

Microsoft® Certified Windows® drivers

Print Touch NFC tag for online printer documentation and tools

100 card covered feeder (30 mil)

45 card capacity output hopper (30 mil)

16-character LCD operator control display

300 dpi (11.8 dots/mm) print resolution

Two-year warranty on printer

Two-year (unlimited passes) original printhead

One-year hot swap (U.S. only)

Kensington® secure lock slot

PRINTING SPECIFICATIONS

Dye-sublimation thermal transfer direct to card

Full color or monochrome printing

Single- or dual-sided printing

700cards / hour monochrome single-sided

195cards / hour single-sided YMCKO

140cards / hour dual-sided YMCKOK

Edge-to-edge printing on standard CR-80 media

MEDIA SPECIFICATIONS

NOTE: The ZXP Series 3 printer is designed to work only with Zebra True Colours ix Series high-performance ribbons

Zebra intelligent technology automatically detects and authenticates ribbon Integrated cleaning roller included with each ribbon

Media Starter Kit (single-sided): 1 YMCKO ribbon, 200 30-mil PVC cards Specially designed cleaning supplies simplify preventive maintenance

True Colours ix Series ZXP 3 Ribbons

YMCKO: 280 images/roll

½ YMCKO: 400 images/roll

YMCKOK: 230 images/roll

KdO: 700 images/roll

KrO: 700 images/roll

Black Monochrome: 2000 images/roll

Red Monochrome: 1700 images/roll

Blue Monochrome: 1700 images/roll

Gold Monochrome: 1600 images/roll

Silver Monochrome: 1600 images/roll

White Monochrome: 1400 images/roll

Card Compatibility

For optimum card quality and printer performance, use genuine Zebra card supplies. For more information, visit www.zebra.com/cards.

Card Thickness: 10-40 mil

Card Size: CR-80, ISO 7810 format, Type ID-1

Card Material: PVC and PVC composite

Smart Card Contact — ISO 7816-1,2,3,4

Smart Card Contactless MIFARE® ISO 14443A/B

Spot color or monochrome print only on < 20 mil card thickness

OPERATING CHARACTERISTICS

Environmental

Operating Temperature: 60ºF to 86ºF/15ºC to 30ºC

 

Operating Humidity: 20% to 65% non-condensing

 

Storage Temperature: 23ºF to 131ºF/-5ºC to 55ºC

 

Storage Humidity: 20% to 70% non-condensing

 

Media Storage:

 

• Temperature: 41ºF to 77ºF/5ºC to 25ºC

 

• Humidity: 35% to 65% non-condensing

 

• Do not store in direct sunlight

 

 

Electrical

Auto-switching single-phase AC power

 

Operating range: 90-132VAC and 190-264VAC RMS

 

Frequency range: 47-63 Hz

 

FCC Class A

 

 

PHYSICAL CHARACTERISTICS

Length

14.5" (368 mm)

 

 

Height

9.3" (236 mm)

 

 

Width

7.9" (200 mm)

 

 

Weight

11.6 lbs (5.3 kg)

 

 

COMMUNICATION AND INTERFACE CAPABILITIES

USB V2.0 (cable included) — standard

Built-in 10/100 Ethernet — optional*

SOFTWARE TOOLS

CardStudio card design and issuance software

Windows® XP (32 bit), Windows Vista® (32 and 64 bit), Windows Server® 2003 (32 bit), Windows 7® (32 and 64 bit), Windows Server 2008 (32 and 64 bit), Windows 8® and Win 8 Pro (32 and 64 bit), Windows Server 2012 (64 bit)

Please see www.zebra.com for up to-date listing of supported systems.

OPTIONAL FEATURES

Built-in 10/100 Ethernet connectivity*

Manual card feeder bezel

Zebra OneCare extended product warranty programs

Lockable enclosure with opaque output bin*

Encoding Options and Specifications

Magnetic stripe encoder — ISO 7811 (new and pre-encoded); tracks 1, 2 and 3; high and low coercivity; stripe down; 30 mil cards only

ISO 7816 smart card contact station for third-party external contact encoders*

Combined MIFARE® ISO 14443 (13.56 MHz) contactless and ISO 7816 Contact Encoder with EMV level 1 certification and PC/SC compliance (includes 50 card capacity [30 mil] output hopper)*

Encoding over USB and Ethernet

PRODUCT WARRANTY

The ZXP Series 3 is warranted against defects in workmanship and materials for a period of 2 (two) years from the date of shipment. For the complete warranty statement, please visit: www.zebra.com/warranty.

RECOMMENDED SERVICES

The Zebra OneCare Service portfolio of Essential, Select and Premier maximizes the availability and productivity of your devices. Key features include 24/7 technical support, comprehensive coverage, advance replacement and software updates. Optional Visibility Services are available. For more information go to www.zebra.com/zebraonecare.

For optimum print quality and printer performance, use genuine Zebra supplies. Specifications subject to change without notice.

*Field upgradeable options

Ideal for These Applications

Security

Employee and student ID cards

Access control cards

Retail / Hospitality

Loyalty cards

Gift cards

Membership cards

Financial Services

Instant issuance financial cards

৳95,000.00
Zebra ZXP Series 7 Double-Sided 300DPI ID Card Printer (ZXP Series 7 Card Printers)
Zebra ZXP series 7 double-sided ID card printer has dye sublimation / thermal transfer technology, 300 dpi print resolution, color YMCKO print speed 300 cards/hour, monochrome print speed 1375 cards/hour, USB 2.0 and Ethernet 10/100 printer connectivity, Microsoft windows-certified drivers, 200-card capacity feeder, 15-card reject hopper, 100-card output hopper, double-card feed capability, ix Series intelligent media technology, 21-character x 6-line LCD operator display with configurable soft keys, Pennington physical lock slot, 1 year unlimited warranty on printer and print head.
৳282,000.00
Fargo HDP5000 Dual Side Base ID card Printer & Encoder (fargo-hdp5000)

Superior print quality, higher reliability and durability, greater security – your photo ID cards will have all these qualities when you print and encode them with the affordable and versatile HDP5000 ID card printer and encoder.

  • High Definition Printing® gives you superior print quality, even on smart cards with embedded electronics, for a more impressive public image.
  • High reliability and durability lowers your total cost of ownership, and affordable pricing makes High Definition Card Printing available to practically any business.
  • We back the HDP5000 ID card printer and encoder with a lifetime printhead warranty and three-year warranty on everything else.
  • Versatile modular design permits change as your needs change. Dual card input hopper, dual-sided printing, single- or dual-sided lamination and card encoding technologies are all field-upgradeable features.
  • Minimal training is required because of its simple design and intuitive operation. Cards, ribbons and overlaminates come in cartridges that load quickly and easily.

HDP5000 ID Card Printer & Encoder Key Features

Our enhanced HDP5000 ID card printer and encoder is feature-packed. Perfect for smart cards with embedded electronics, it reliably produces cards in High Definition with the highest image quality available. The HDP5000 ID card printer and encoder upgrades easily in the field, with additional modules.

  • New optional dual card input hopper simplifies card handling and minimizes downtime.
  • HID Global next-generation HDP platform enables faster print speed.
  • Optional single-sided or simultaneous dual-sided lamination for higher card security--quickly.
  • Dual-sided card printing option lets you double the print area available without manually reloading cards.
  • Optional High Durable HDP Film offers greatly enhanced card durability.
  • SmartScreen™ LCD Control Panel displays helpful status messages and prompts.
৳345,000.00
Per Page      1 - 14 of 14
  • 1