Security

Sort By:  
Viewtech XVR + DVR 16CH (e1-xv-vt-11)

Check accessories tab to add a hard drive.  Viewtech will install the hard drive and power up the NVR before dispatch.

The Dahua 32CH NVR offer an unbelievable incoming bandwidth of 320Mbps.  This unit has 4 HDD bays allowing total storage of 24TB.

H.264 & H.265 Recording

This NVR is compatible with both H.264 and H.265 streams.  

Built in PoE Switch

This NVR offers a built in 16 port PoE switches. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.

Dual HDMI Outputs

One primary / replay output and one programmable output for spot monitors. The programmable output can be fully programmed with a number of different cycling and matrix functions.

Plug & Play

This NVR offers a built in 16 port PoE switch. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.

The remaining 16 cameras can be installed via an external switch.

Advanced Motion Detection

Multi-region maskable motion detection allows complete customisation of motion activated recording. Both sensitivity and threshold can be adjusted.

Web Interface
The easy to use web interface is fast and intuitive. Features likes video settings, SD card record and playback control, network information, motion detection as well as hundreds of other settings can all be done from here.

Mobile Phone Support

All Dahua cameras and NVRs feature fully featured mobile apps. These are supported for iPhone and Android. Features include live view, playback, alarm monitoring, status monitoring, full remote setup and push alerts. Push alerts send notifications straight to your phone regarding motion detect or other alarms.

৳0.00
C-Tec Standard 2 Zone Conventional Fire Alarm Panel (CFP702-4)

LPCB certified to EN54-2/4, C-TEC's CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.

Optional repeaters, relay expansion boards and EN54-13 system compliance devices are also available.

LPCB BSI CE






  • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13. compliance from the BSI.
  • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
  • Manufactured by C-TEC in the UK.
  • Two detector zone circuits.
  • Four conventional sounder circuits*
  • Integral 1.5A EN54-4/A2 compliant switch mode PSU.
  • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
  • Two on-board relays (Fire and Fault).
  • Two open-collector outputs (Remote and Reset).
  • 'Class change' and alert inputs.
  • Installer-friendly design.
  • Attractive flush or surface mountable plastic lid and enclosure - no bezel required.
  • Low 25mA quiescent current.
  • Multiple indicators.
  • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
  • Space for two x 12V 3.3Ah VRLA batteries.
  • Fully compatible with C-TEC's ActiV range of conventional fire detectors.



৳0.00
C-Tec BF433C/CC/SR ActiV Conventional Wall Fire Sounder VAD with Shallow Base (fi-ct-so-11)

C-Tec BF433C/CC/SR ActiV Conventional Wall Sounder VAD with Shallow Base

The ActiV Hi-Output range of conventional sounders and combined sounder visual alarm devices (VADs) are designed for use with C-TEC’s range of fire panels and other compatible third-party panels. However, compatibility testing with third-party panels is recommended to ensure correct operation. With a 100 dB(A) peak sound output @ 1 m, their purpose is to visually and audibly alert building occupants of a fire alarm. Units are supplied with either a shallow or deep base, in a red plastic enclosure.

The devices offer low current consumption, high sound output, high efficiency VADs, 31 selectable primary tones with selectable secondary tone set, two selectable volume levels and three selectable VAD flash rates. Tones, volume levels and VAD flash rates are changed using the device’s 8-way DIP switch.

Key Features:

  • LPCB certified to EN54-3 (Sounders) and EN54-23 (VADs).
  • Provides 'W-2.75-9' rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.
  • Impressive 100dB(A) sound output @ 1m.
  • 31 selectable primary and secondary tone pairs and two volume levels (high and low)
  • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
  • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
  • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
  • IP21C rated.
  • Manufactured in the UK by C-TEC.
৳0.00
C-Tec Fire ActiV Optical Smoke Detector (fi-ct-smd-11)

 C4416

  • A high-quality optical smoke detector offering outstanding detection performance at a very competitive price.
  • Manufactured by C-TEC in the UK.
  • Third-party certified to EN54-7 by Intertek.
  • Wide 6-33V DC operating voltage.
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
  • Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels allowing a greater than 8 year life-span. 
  • Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.

 LPCB CE

৳0.00
C-Tec Fire ActiV Rate of Rise Heat Detector (fi-ct-hd-11)

 C4403A1R

  • A high-quality Type A1R static/rate of rise heat detector offering outstanding detection performance at a very competitive price.
  • Manufactured by C-TEC in the UK.
  • Third-party certified to EN54-5 by Intertek.
  • Wide 6-33V DC operating voltage.
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
  • Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.

LPCB  CE

৳0.00
ZKTeco K50 Fingerprint Time Attendance & Access Control Terminal with Adapter (k50)

• Elegant and modern design.
• 2.8-inch color TFT LCD screen.
• TCP / IP interface and USB-Host port.
• Includes lite software for assistance management.
• The attendance report is exported in Excel format using a USB memory.
• Equipped with backup battery power. Multiple languages.
• Simple administration and scalability

Screen: 2.8 Inch TFT
Finger Print Capability: 3000
Card capacity: 1000
Event Capacity: 1,00,000
Communication: TCP / IP, USB-Host
Standard functions: Programmed Ring, SMS, Labor Code, Timetable
Summer, SSR Report, Self-Service Search, Automatic Change of
Status, T9 Input, 9 Digit ID, ID Card
Battery Backup: 2000 mAh
Power supply: 5V DC 1A
Operating Temperature: 0 ° ca 45 ° c
Operation Humidity: 20% - 80%
Dimensions: 185 x 140 x 30 mm
+> Warranty: One Year

৳12,200.00
ZKTeco K40-Pro Time Attendance & Simple Access Control Terminal With Adapter (k40)

Description:

  • TCP/IP, USB-host
  • Built-in battery
  • Simple access control or external bell
  • Multi languages
  • SSR report in excel forms
  • Supports WDMS

Specifications:

  • Fingerprint Capacity 1000 (2000 without SSR )
  • ID Card Capacity 1000 (Optional)
  • Record Capacity 80,000
  • Display 2.8-inch TFT Screen
  • Communication TCP/IP, USB Host
  • Standard Functions WDMS,Web Server, SMS, Automatic Status Switch,Self-Service Query, Work Code, T9
  • input, 9 Digits User ID, DST, Schedule Bell
  • Optional Functions ID/Mifare
  • Software ZKTime.net 3.0
  • Power Supply DC 12V 1.5A
  • Verification Speed ≤0.5 sec
  • Operating Temp. 0 °C- 45 °C
  • Operating Humidity 20%-80%
  • Dimension 184 × 136 × 37.6 (Length × Width × Thickness)
৳12,500.00
ZKTeco SF300 Fingerprint Access Control and Time Attendance (SF300)

• 2.8-inch touch screen, color display with graphical UI for easy operation
• Up to 24 user-defined schedules that can be activated on a daily bell alert (optional)
• Prompt audio acceptance or rejection signals for valid or invalid fingers
• Compact and lightweight, small size for 86mm (L) x 86mm (H) socket installation
• TCP/IP or RS485 communication for various networking environments
• Supports USB flash drive for offline data management
• Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
• Up to 15 multi-verification methods to enhance security level
• Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination etc.
• Duress Alarm offers effective protection against duress by threats
• Tamper proof switch and multiple alarm outputs
• Multi-languages display available on quest

৳13,200.00
Per Page      1 - 11 of 11
  • 1